– Change Password | Admin Login

What is IP Address? is one of the common IP addresses that is the default gateway for most wireless routers or ADSL modems. This is a private IP address used to communicate with networking devices across private networks.

Amazingly, if you have any router of this IP address then you can use the same username & password which is also available in our quick guide.

Are you using the router or modem with a IP address? If yes, then check out the router settings in this quick guide. However, it should be noted that the default IP address is different for different brands of routers, & users are generally allowed to modify the default address. Let’s start now!!

How to Access or Login

Follow these easy steps :

  • First of all, make sure that your Wi-Fi is connected to the internet to access your router’s console. It is recommended to use a wired connection while making configuration settings otherwise you can also conveniently use the wireless network.
  • Now, open any web browser (Opera, Chrome, & Mozilla, etc.), and type in the address bar. However, you can also type or enter, 192.168.11, or as an alternative address.
  • Finally, you can enter the default username & password of your router by accessing the admin panel.
  • If you are still unable to find or type the correct address then check out our default gateway list given below.

Default List for the IP Address (or http//

Now, easily find the login IP address of the router, its username & password with the given default list :

  • Address ==

Username == admin

Password == password

Username == admin

Password == admin

What are the Most Common Default Logins for IP Address or www.

The most common default logins for this address are – Username == admin, Password == admin.

What are the Default Values for Accessing the Admin Panel?


What are the Login Credentials for Admin? 

The following are the default values for admin:

How to Fix Troubleshooting?

If you are facing troubleshooting issues then check out how to fix them:

  • Start with checking if the Ethernet cable is properly connected or plugged between your router & the device.
  • There are chances that you may have wrongly typed or entered a misleading address that’s why you are unable to configure Wi-Fi settings. To avoid this condition, you can copy & paste the correct address from our default IP address list, verify the address, or correctly type it.
  • If the above options don’t work then you can reboot the router which can make everything okay once you turn it back on. While taking this action, keep a backup of your router’s settings otherwise rebooting can wipe all the saved or previous settings.
  • It is also recommended to update your router if any new router is available for download. This can save you time & effort.
  • At last, if the above follow-ups don’t work then there are chances that you might have a default router or issues in the internet connection. Therefore, don’t delay in calling the Internet Service Provider (ISP) or manufacturer of the router to resolve the issue.

How to Factory Reset Router to Restore IP Address

Is your router taking too much time to respond? Then you need to factory reset the router to restore IP address as you can use the reset button to change settings if your default IP address isn’t functioning properly for you.s.

The steps to factory reset the router are as follows:

  • Check out the reset button beside the router Ethernet ports.
  • Now, take the help of the needle inside or hold the reset button for around 10-15 seconds.
  • Release the button when the power LED is turned off & turn it on again.
  • So, this way you initiate the rebooting process that may take 3-4 minutes so keep waiting to complete the process.
  • Afterwards, the reset process is successfully done then follow the above-given steps to access router settings in default mode & start from fresh.

Important Note: It’s quite obvious that if you initiate router reset settings then it will allow you to have all internet settings or configuration backup files to set up again. The reason being, as it would erase the entire configuration stored in the system & the router would restart again.

Don’t forget to check our other posts. Contact us today!!

Also Read:-

(For more updates on login, keep visiting this blog)