Login Admin Wifi Settings is the default gateway for many WiFi routers’ admin pages. If you want to modify the WiFi settings of your router, then you must know the IP address By typing the default IP address on your favourite browser, you can get access to the WiFi router admin page. All you need to do is to follow a simple login process and you are good to go! Want to know more about WiFi Settings? Continue reading as we’ve covered them all in this article.

How to login into your WiFi router with

Before logging into your home WiFi router, make sure you have:

  • The correct IP address of your WiFi router.
  • Your Default Username and Password.
  • Network accessible System or Device.

As you get all three things mentioned above checked, we can get into the process of login into the WiFi router. Here’s what you need to do:

Step 1: Connect your WiFi router to the system via a wireless or wired medium. It is preferable to use a wired connection over a wireless connection to avoid sudden logoff.

Step 2: Open any web browser of your choice on the system and type the default IP address in the search bar. Run the search.

Step 3: A login page will appear on your screen. Enter the login credentials (i.e. username and password) in the blank fields provided and click on “Login”.

You can follow a similar login process to log into the industrial WiFi router using as the default IP address. 

Default Username & Password Combinations for

If you don’t remember your username or password, then you always have the option to find them on the sticker pasted at the bottom of the router or the instructions manual. Else, you can try out the default username and password combinations given below for the IP address.

Username Password
admin motorola
admin admin
admin password
admin cableroot
admin w2402
user user
telecomadmin admintelecom
root root
root change on install
airlive airlive
n/a n/a
root admin


What is the correct IP address for your WiFi router? 

Many users enter the wrong or misspelt IP addresses in their search bar and thus, face issues while logging into the WiFi router. Multiple incorrect versions of the IP address are floating on the internet. Using them for login can cause loading errors or can even display a blank web page.

The incorrect versions of that you must avoid are:

  • 192.168 l00 1
  • 192.168.l00.1
  • 192.168 100.1
  • 192.168 100
  • 192.168 l 100.1
  • 192.168 100 1
  • 192 l.168.100.1
  • htlp://168.100.1 

The correct versions are:


If these IP addresses don’t work for you, then probably is not the default IP address of your WiFi router. You can try using other default IP addresses or you may also refer to the bottom sticker and instructions manual of your router. There you will find the correct IP address of your WiFi router mentioned as “Default Gateway”.

Change your SSID and WiFi password with

Now, as you know how to login into the WiFi router admin page, you can start making changes to your WiFi settings. Here are the steps to modify the SSID and WiFi password (for TP-Link):

  1. After you log in with the steps provided above, go to the “Wireless” option. There, click on “Wireless Settings”.
  2. In the “Wireless Network Name” field, enter the new WiFi SSID name and click on “Save”.
  3. Again from the “Wireless” option, go to the “Wireless Security” and under WPA/WPA2 encryption section, type the new password in the “Password” field.
  4. Click on “Save” to save changes. You can follow a similar procedure for other WiFi routers as well.

Factory Reset

To delete the new changes made to the router, you can perform a factory reset. For this, long press the reset button (beside the ethernet port) for 10 to 15 seconds. The WiFi router will reboot itself in about 2 to 3 minutes. You can log in again by following the steps given above in this article and make modifications to the WiFi settings.

Also Read:-

(For more updates on Arris Wifi router login, keep visiting this blog)

Leave a Reply

Your email address will not be published. Required fields are marked *